Xprog M Box ECU Programmer

Friday, October 18, 2019

Xprog 6.12 programmer – What’s new?

Here will come the latest Xprog 6.12 full kit.

Xprog programmer 6.12 features new authorizations and adapters and new inner board. That is what the difference lie in Xprog 5.84 and 6.12.

Now, we’ll talk about the difference:

Items in parcel
PCB
Authorization

in detail..

Xprog 5.84 and 6.12 full kit

source: http://www.obdii365.com/wholesale/xprog-m-v5-84-box-ecu-programmer.html

source: https://www.obdii365.com/wholesale/v6-12-xprog-m-ecu-programmer.html

Note: Xprog 6.12 comes with 4 new adapters:

ADP-0006 M35080 ICP, QFP64 MC908AZ/AS603K85K, ADP-0019 Rev. B, QO18S714

Xprog 6.12 full adapter list:

ADP-0019 Rev.B —-New!

ADP-0006 M35080 ICP adapter —New!

QFP64 MC908AZ/AS60 3K85K adapter —New!

QO18S714 —New!

ADP-0001 TMS370 PLCC28 programming adapter

ADP-0002 TMS370 PLCC44 programming adapter

ADP-0003 TMS370 PLCC68 programming adapter

ADP-0004 Motorola HC05B/X PLCC52 programming adapter

ADP-0005 Motorola HC05B/X QFP64 programming adapter

ADP-0006 ST M35080 in-circuit programming adapter

ADP-0008 TMS374 family in-circuit programming adapter

ADP-0009 MC68HC05V12 programming adapter

ADP-0010 TMS374 on-board programming adapter

ADP-0011 HC11EA9/E9 programming adapter

ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter

Additional adaptor for 5M48H P-Flash

ADP-0019 Rev.A

EWS3 adaptor

EEPROM adaptor

QFP28 adaptor

QFP64 adaptor

QFP80 adaptor

QFP112 adaptor

QFP144 adaptor

Xprog 5.84 and 6.12 pcb

Xprog 5.84 pcb

Xprog 6.12 pcb

Note: Version 6.12 hardware is better since the board is updated.

It runs more steady and faster than old version.

Xprog 5.84 and 6.12 authorization

Note: Xprog 6.12 has new authorization:

AUTH-0028-3 Renesas RL78 Authorized

and AUTH-0028-4 Renesas M32C Authorized

XPROG V6.12 full authorization:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)

AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)

AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)

AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)

AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)

AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.

AUTH-0008 BMW EWS3 authorization

AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)

AUTH-0010 MB ZGS001 authorization

AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)

AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)

AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)

AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)

AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)

AUTH-0020 ARM (Micronas, …) Family authorization (allows to read/write internal flash and external serial EEPROM)

AUTH-0021 ARM (Micronas, …) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).

AUTH-0023-1 MAC7xxx

AUTH-0023-2 XC23xx

AUTH-0024-1 MC9S12Cxx

AUTH-0024-2 MC9S12XE

AUTH-0024-3 9S12XE SECURITY

AUTH-0024-4 MC9S12HA/HY/P

AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13

AUTH-0027-1 HC(S)908 update Authorized 2016/3/13

AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13

AUTH-0028-1 Renesas V850 Authorized 2017/10/9

AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

AUTH-0028-3 Renesas RL78 Authorized —New!

AUTH-0028-4 Renesas M32C Authorized —New!

http://blog.obdii365.com/2019/10/18/xprog-6-12-new-pcb-adapter-and-authorization/

Tuesday, September 10, 2019

What is the Best Programmer to read TMS370 MCU?

What is the best programmer to read TMS370 mcu, vvdi prog, Orange 5, Xprog or other programmers? Let’s check it out.

Orange 5

1) Orange 5 Original

Orange 5 definitely no problem with TMS370

But it require TMS370 adapter and license for instrument TMS370/TMS374/TMS375.

2) OEM Orange 5

TMS370 adapter comes default in package and does not require license.

Orange5 clone works well.

Support EEPROM programming of TMS370 series CPUs.
You should weld everything, try that, it will surely work in a good way.

Xprog

Xprog box reads TMS379 smoothly

I’m using Xprog m version 5.6 and it’s a clone but it works just fine and haven’t had any issues with it so far.

Xhorse VVDI Prog

To read TMS370 mcu, you need extra TMS370 adapter

vvdi prog supports following TMS series mcus:

Add TMS370C002A, TMS370C010A, TMS370C012A, (Need TMS370(PLCC28) ADAPTER)
TMS370C020A, TMS370C022A, TMS370C032A, TMS370C040A, TMS370C042A, (Need TMS370(PLCC44) ADAPTER)
TMS370C050A, TMS370C052A, TMS370C056A, TMS370C058A,TMS370C256A (Need TMS370(PLCC68) ADAPTER) options in <2-MCU>->

Wiring diagram example:

Read & write the old Jetta Immo box

Read & write Opel Audio module

Note: If vvdiprog gives error “chip into connect”, please clean the pins of processor, then retry again.

UPA USB

UPA requires TMS370 adapter as well.

UPA can read following tms series: TMS375c006TMS370cx36, TMS370cx42, TMS370cx0x, TMS370cx5x

Example: Reading Opel TMS370 with UPA Programmer

Yanhua TMS370 Programmer

It is a cheap and dedicated programmer for TMS370.

It is the most useful tools to program the TI TMS Microcontroller EEPROM (TMS370CX6X, TM370CX5X, TMS370CX4X, TMS375C006);

Odometers models:

Renault Laguna, Espace Jaeger, Lancia Kappa Jaeger; Supports all dash versions with 68 pin PLCC TMS370C756, TMS370C456 and with 44 pin PLCC TMS370C456;

IMMO Pin code models:

Opel, VW, Nissan (Almera, Primera) etc

Car radios models:

DELCO GEO
DELCO OPEL CDR 500
DELCO 09351281
DELCO 16239661
DELCO CHEVROLET UL0 TheftLock (95-2000)
DELCO CHEVROLET CD TheftLock (95-2000)
DELCO CHEVROLET AM/FM+CD Delco LOCII (97)
DELCO PONTIAC Family TheftLock (95-2000)
DELCO TRANS SPORT AM/FM CD W/ EQ (98)
DELCO TRANS SPORT CDM (M:16166661) TheftLock (95)
FORD 2006 RDS TI
FORD 2007 RDS TI
FORD VW SOUND 1
FORD VW SOUND 2
OPEL CDR 500 GM0500 (DELCO)
VW VW Sharan SOUND 1 RDS 7M0 035 156B
VW VW Sharan SOUND 2 RDS 7M0 035 152B

Package including:

1pc x TMS370 Main Unit
1pc x PLCC68 Adapter
1pc x PLCC44 Adapter
1pc x PLCC28 Adapter
1pc x Serial Connect Cable
1pc x AC Adapter
1pc x CD

ETL-TMS 370 Programmer

It is the TMS370 specific eeprom programmer,

Supported devices:

TMS370CX6X

TMS370CX5X

TMS370CX4X

TMS370CX3X

TMS370CX0X

TMS375C006

TMS374C003A

TMS374C013A

Easy to use on Windows 95/98/2000/XP laptop.

Customer experience:
Xprog & Orange5 is the best for TMS370.

http://blog.obdii365.com/2019/09/10/read-tms370-with-vvdi-prog-orange-5-or-xprog/

Monday, April 22, 2019

Xprog read old Benz MCU "Device silent Timeout error" Solution

I have bought a China Xprog-m v5.50 to read out the CPU of the old Mercedes Benz Keys. So i have connected the adapter according to the diagram and installed the programme, but when I´m trying to read out the Cpu there is always “Device is silent. Timeout error“. First the green LED is on for a moment, and then turn red. Then i changed it into com port 1 (com port 29 at the beginning ) Soldered the cables to the adapter for the chip…a external 9v cable On 1 and 28 is + and –

But still the problem: Device is silent. Timeout error. Someone said, “1 foot orange,raise. Oscilator setting automatic setting 2mgh.” (i tried but not worked) Another tip i got from mhhauto and tried: “1- Don’t use any adapter, read the MCU in key. 2- Lift(desolder from key) pin 1 3 – Match the frequency with key crystal (Usualy 2Mhz but sometimes 4Mhz) 4 – select MC68HC05E6(0F82B) 5 – pin out MCU with xprog: VppR—–1(lift) Gnd——28 B2——–11 B3——–12 B5——–2 B6——–15 VCC——27 Ps. USB cable.No need for external power supplies. You can use UPA USB programmer instead xprog, need connect one more wire but it’s more stable.” So I have soldered the MCU on the Key back, and this time luckily, it works fine. However, another problem!! I could read it out and save the .bin, but i cannot choose “erase” the file to make the key blank to put a other .bin on the key.

One solution i found in web is to write the new dump in key without erase. Yes, it did!!! It works when i put new dump without erase now. But first i have tried to put everywhere 00 00 (zeros) and write to MCU, and this works, but when i have tried to write via IR with my ak500 key programmer it doesn’t work. So i have done via MCU with xprog and it works. But it would be interesting, why ak500 don’t work with this key. I first wanted to read out the blank key, but doesn’t work. Usually when I’m erasing NEC keys and read it out there is “blank key” and i can write it without any problems.

Thursday, March 28, 2019

Xprog 5.7.4 Xprog 5.5.5 Download Free: No Need Dongle

Free download xprog box 5.7.4 xprog m 5.5.5 software:
download link: https://mega.nz/#F!I8ZkDB4B!C2SuJxYODFbCNTMDXNxDPg
content:

xprog 5.5.5:

xprog 5.74:

note:
I broke my Xprog when i try to update to 5.7.4.
I must replace yje atmel chip. I bought new, then program it with TL866 programmer
All instructions you find in txt file
For me, 5.7.4 software didn't work, but 5.5.5 works very good
Dongle for 5.5.5 not needed

installation instruction:

Unzip the XProg 5.7.4.zip contents to a folder on your desktop.
Open the folder AVRDUDESS and run avrdudess.exe program.

The following procedure will flash the version 5.5.5 firmware on your Xprog device.
Select your programmer.
Click on "Detect" at the top right corner. It will detect a ATMEGA64.
Select your flash file which is in the Firmware folder.
Select your EEPROM file which is in the Firmware folder.
Enable the "Erase flash and EEPROM (-e)" option.
Set the following in the "Fuses & lock bits"

L : 0x2F
H : 0xCA
E : 0xFF
LB : 0x3C

and enable the "Set fuses" and "Set lock" options.

Finally click on "Program!" and wait till it finishes and verify all the data are flashed correctly.
If not then try again.

Now that the Xprog has the 5.5.5 version firmware,
go to the "XprogDesktop" folder and run "XprogDesktop.exe" file.
Click on "Help->Hardware info..." and once it opens it will ask to upgrage the firmware.
If not, then click on the "Upgrade" button. Once this procedure is finished
you can try and read a processor. It will ask for a certificate. If it fails try again.
When it is finished the Xprog will run the latest firmware and you will be able to work
with the latest 5.7.4 software.

This is not a completely tested solution and you try the above steps with your own responsibility.
I bring no responsibility if you brick your own Xprog programmer.

Very important:
If you want xprog software confirmed to work, you can get a decent crack version.
A lot of xprog download links can be found here:
http://blog.obdii365.com/2017/04/23/xprog-5-74-5-70-5-60-5-55-5-51-download/
(Newest) Xprog 5.8.4 confirmed to work perfectly:
http://www.obdii365.com/wholesale/xprog-m-programmer-dongle-cas-decryption.html