Xprog M Box ECU Programmer: August 2018

Thursday, August 23, 2018

How to read BMW Freescale MC9S12D64 with Xprog V5.60

Here's the DIY guide for those whom want to get tripple blinker on their BMW E46.

DIY:
1) you need LSZ module with =>SW3.6 on sticker
2) xprog v5.55 v5.60 or above with mc9s12 bdm adapter
3) sticked dump of ci37 (eeprom virgined, need to be coded after installing ecu to car)

wires color legend (follow xprog box connection manual for mc9s12d64):
blue - reset
red - VCC
green - BKGD
yellow - xclks
white - extal
gray - GND

ground wire instead of soldering to pcb can be ezly connected to pin 32 in connection socket.

(Click to enlarge)

Result here:

Free download: lsz_c37_xprog.zip

Credit to MeMpHiSj from MHHAUTO

http://www.obdii365.com/producttags/xprog.html

Tuesday, August 14, 2018

Benz Sprinter 2010 EZS Soldering Pinouts to Xprog

Purpose:

Do odometer correction on 2010 Sprinter Van. I need the soldering points for the ezs/eis.I can't actually see the mask but after extensive reading every points to them having the 0L01Y mask. Which programmer will work?

Solution:

R260 original ok
clone rosfar,ok
xprog clone ok
R270 ok

Use xprog the pinouts for xprog is what posted below. i always do this with xprog and never had a problem just select in device options " read and verify " make sure it is NOT selected and you should be ok , use the BDM adaptor with xprog for it
here is the settings i use and you know the story always keep backup of the files you read