Purpose of downgrade: xprog clone v5.5.5 cannot read or write BMW FRM3 reliably. Solution: Downgrade to X-Prog v5.5.1 and use a dump from ...

 Q: Looking to do BMW FRM3 programming and looking at purchasing the Xhorse VVDI Prog . I am curious if I were to get a corrupted FRM3 read ...

Problem: I've bought a Clone Xprog 6.12 , but when select any mcu to read it always says that “the certificate has expired or is not va...

I have  xprog 5.55  clone a couple of years and never let me down mate. newer versions have issues. also upa clone, old but still good, tl8...

Xprog m box v5.84 error "Access violation at address 00616DC6 in module "XProgDesktop.dll". Read of address 00000000."...

Bought  xprog 5.84  box from China, installed on my windows 7 32bit according to the instruction  video . When I am going to read eeprom th...

New Xprog M software 6.12 and 5.84 which version reads more? Xprog 6.12 adds 4 new adapters  ADP-0006 M35080 ICP, QFP64 MC908AZ/AS603K85...

Latest version  Xprog V6.12  box programmer software can be downloaded here for free: Software version: V6.12, Firmware: V4.4 https://s...

Xprog M Box V5.84 programmer supported Full Chip List: Type   Serial EEPROM     Atmel AT24C01A AT24C02 AT24C04 AT24C08 AT2...